Miniature, portable digital SDR-Software Defined Radio
General Specifications
Receives HF: 160m – 10m Amateur (Ham) Radio & AM International Broadcast Bands
VHF: FM broadcast, Aircraft Band, Amateur, Marine, NOAA Weather Radio
UHF: GMRS & FRS (family radio service)
Frequency Coverage and Modes:
MW-HF Continuous Coverage: 500 kHz - 30.000 MHz
Amateur Band Selections: 160m – 10m
CW-SSB auto-selection with Mode override (AM-CW-SSB)
Auto-Filter Width select with override: AM: 10 kHz/SSB: 2.6 kHz/CW: 1 kHz
Tuning Resolution (cursor control): 1 MHz - 100 – 10 - 1 kHz / 100 - 10 Hz
International Broadcasting: auto-select AM - 5 kHz steps - cursor override with 7.5 kHz filter
VHF VHF: Continuous Coverage: 64.0 - 225.0 MHz
FM Broadcast: 87.7 - 107.9 – monaural - 200 kHz channel steps
Aircraft Band: 118.000 - 136.975 MHz, AM auto-select -25 kHz channel steps
Amateur, Marine, and Public Service: 137.0 - 225.0: NBFM
Tuning Resolution (cursor control): 1 MHz - 100 – 10 - 1 kHz / 100 - 10 Hz
UHF UHF: Continuous Coverage: 438.0 – 468.0 MHz – Mode NBFM with Mode override
Bands: Amateur starting at 438.0 MHz, GMRS, FRS allocations -25 kHz steps/cursor override
Tuning Resolution (cursor control): 1 MHz - 100 – 10 - 1 kHz / 100 - 10 Hz
Receiver Architecture Dual conversion super-heterodyne with low-IF , I-Q digital sampling, 16 bit DSP with digital audio CODEC
DSP algorithms for all demodulation: DSB-AM, SSB, CW, WBFM, NBFM and channel filtering
Audio System –
(Digital CODEC) Speaker Driver: 1 W into 8 Ohm load
Internal 2.5” diameter, Mylar communications grade speaker
External monaural speaker jack (3.5 mm stereo jack - back panel)
Headset Driver: 40 mW into 16 Ohms. (3.5 mm stereo jack - front panel)
Antenna Inputs MW-HF Port: 1000 Ohm – 3.5 mm audio jack
Accepts telescoping whip or wire antenna, auto detection
MW-HF Port: 50 Ohm – BNC (female)
VHF-UHF Port: 50 Ohm – BNC (female)
Display 64 x 128 OLED Display with EMI filter-lens
Readable outdoors and manually dimmable
Power Inputs USB and 6-18 VDC – 2.1 mm diameter center pin (positive) jack
Power Consumption 1.1 W (headset) – 1.6 W (speaker)
USB Mini-B –USB 2.0 Jack (powered): Software updates
Mechanical Overall Size: 5.64” W x 2.43” H x 6.10” D (including knobs, jacks , feet)
Weight: 1 lb – 12 oz
Knobs: Machined Aluminum – Black Anodized
Front Panel: Machined Aluminum – Powder Coated – Black semi-gloss
Case: 20 Gauge Steel, Powder Coated – Black Crackle.
ESD Protection: ESD Diodes: Antenna ports - Power - USB -Keys – Knobs
Origin Designed and manufactured in USA
Warranty Limited 1 year warranty on parts – labor – workmanship
Source: http://www.commradio.com/
Total Pageviews
Popular Posts
-
Having Space Constraint At Your QTH To Put Up An Antenna For HF Band?. Then Try Constructing This Magnetic Loop Antenna. D...
-
There is calculator for building magnetic loop antenna. Try this calculator, to see hows the performance before making you own magnetic loop...
-
Maybe some of us are regretting about their ISP ( Ex: Celcom broadband in Malaysia ) blocking ports for Echolink. This method also applicabl...
-
DroidPSK is an app for Android to decode and encode Ham Radio BPSK31 with the build in microphone/speaker or wired to your radio. A waterf...
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment