Total Pageviews

Popular Posts

Saturday, September 14, 2013

Are you a LID?

                                                                    Are you a LID?

Are you a lid? Good question, after reading this you can ask yourself does this sound like me?

Let us define what a LID is.


  1. In earlier telegraphy days a LID was referred to a operator that used a Prince Albert can lid to hear the Telegraph sounder easier. Usually these operators were new and sometimes slow and would slow down the whole Telegraphy system because of the operator that was slow or making many mistakes.
  2. A LID now of days is referred to any Ham operator that is a poor operator.
  3. Defined by a friend of mine a LID is some one that does not change there ways even after being corrected.


Why should I care about LIDS?


  1. Amateur Radio can be and will be received by Hams and non hams alike from local level to world level communications. If hams sound like a bunch of morons on the air with out any type of social order , what type of impressions do you think we give to non hams?
  2. Why would some one want to have a bad label put upon them.
  3. Not letting the quality of the Hobby/Service go to the same route as C.B. radio FCC mistake.


Lets look at some of the common mistakes we see ALL across ham radio and in EVERY class level.


  1. Saying out loud on voice when trying to be funny and say HI HI , Hmmm why not just laugh? Would that not be much easier and sound a little more human like. Are you trying to impress someone that you know what HI HI means on CW? Is there really a need for it on phone?
  2. Using "Q" Codes on phone..i.e. QSL, QRT,QSY ... Is there really a need for this on Phone why not just say to your friend "Hey, Jim change frequency to 146.675" Q codes was made for shorthand for CW and adopted on Digital modes for a efficient shorthand. Also a LID should always use Q codes when stations have a strong signal and clear and can speak your native tongue very well.
  3. Using really snazzy phonetic I.D.'s ... Why not use the Primary or Secondary ITU Phonetics? Every one is expecting to hear certain words with certain letters, Does it make sense to use some off of the wall word like example KZ4ZPC Kangaroo Ziggi Four Ziggi Popcorn Candy. When the other operator especially in a bad conditions might think you want to eat some candy popcorn or something.
  4. Use the wrong terminology like on FM say something like " Hey, Jim turn up your modulation(or even worse your Mod). Last time I looked FM Deviates not modulate. Also, using the wrong word for Class C type of amplifiers as :"linear" ,which they are not linear. Which lots of FM Amps are Class C and thus are not linear.
  5. When giving your call sign always say after the call sign For ID , That is a little redundant don't you think?
  6. When communicating with some one always give them dis-honest information. (Sarcastic here) Always tell someone that their audio is sounding very good, (when there audio is extremely basses and mushy or very distorted sounding over driving the transmitter). Tell someone they are full quieting into a repeater when there is a HISS in the background. Always tell someone they are 59 or 599 depending on mode and then ask them to repeat what they said. Or even better you are 599 with deep QSB hmmm, would that not be like hmmm 499 or 399 or something like that??
  7. To be a good lid they must always tune up on the air and to make it even better they must choose the frequency that the DX station is using and key up on top of him , while other stations are trying to work the DX station.
  8. Always call for the DX station even when you can not hear them. Example the DX station is saying something to the effect "DE BP4RR UP 2" The LID must then never put the radio into spilt mode to work the DX station because he can NOT HEAR them saying UP 2! And should be calling for him on his calling frequency and while the DX station is keyed up as well!
  9. Always work a DX station and then at the same time give your signal report and name etc... before the DX station even told you to go ahead, that would be like me going to the bank and jump the line and tell the teller I am here for you to serve my needs. Why not just give your call sign out and wait for the DX station to tell you to go ahead.
  10. Always continue to throw out your call sign even though the DX station is working another station at that time period.
  11. Always speak in third person .i.e. "We are sitting here talking on the radio", "We are clear"
  12. Use words that do not make any sense or do not even exist. like "negoitary" , "destinated"
  13. Always sign onto a repeater with your call sign and that is all, When someone hears a call sign they have NO clue what you are doing, are you listening? are you clearing out? are you ordering pizza or what???
  14. When in a mobile or portable never tell anyone you are mobile or portable, let them just guess at it especially when that is important information.
  15. Never listen to a repeater before you key down or any frequency.
  16. When using a repeater always use .. Hey your signal sounds great over here nice and strong!! , OH never mind that the repeater is probably on a high hill or tower etc and that is retransmits what it hears and the other station signal in lots of cases never comes to you directly.
  17. Always use the word "there" a whole lot like 20 times in one key up. People listening might start wondering where in the heck is "there" at.
  18. Always use the term 73s ,so you can make a plural stament even sound more plural 73 means "best regardS" do you want to say "best regardses"??
  19. Always try to use your "rubber ducky" on your nifty HT when you are many miles away from the repeater or not so good terrain especially on a every day circumstance , so every body will always try to guess what you are talking about.
  20. Always get way into the microphone and see how distorted your audio can get and also to listen to uvula dance around. And if some one tells your audio is too loud or hot then just ignore them and the problem will magically disappear. Always make sure the mic gain is very high to make it sound like you are doing a wind tunnel test in your vehicle.
  21. When going to simplex always choose the national call frequency to hold a conversation on.
  22. In general conversation always break into a conversation with a off of the wall comment or off the subject topic.
  23. Always complain about how the repeater is not working well or how you are not receiving it well.
  24. When a station tells you to stand by just continue to give your information to him ( seen that happen)
  25. Always break into a conversation and say "May I call another Station...kz4zzz this is kz4fff" Not much of a chose there was it? Yea the repeater is a community type of resource , but why jump in between a conversation to do what you want to do. That would be like going to hardware store and see a person that works there helping a customer, do you walk up to person working and demand them to help you? If you say this is normal then this is just right down RUDE!
  26. When working a station and the other station says "Hey Jim my name is Charlie" a LID then should key up and say "Nice to meet you Andrew" Just because QRZ says his first name is Andrew , You know some people do have middle names or even have a shorter name like Bill for William etc...
  27. When a LID always seek out stations that are Calling "CQ contest" or a rare DX station , Make sure you can work them and tell the other station that your name is such and such, you live on this street in this town and you are using such and such equipment and that you really enjoy Kenwood radios etc.. I think you get the point... For one thing that station does not really care too much on all the frivolous information. They are interested in quick contacts!
  28. When signing out with another station that controls the frequency and the stations returns it back to the LID station for his final and the LID gives his farewells and 73 and then the other stations gives his 73. The LID stations must be compelled to key back up and say 73 again or something to that effect. Even though the other station gave the green light for other stations to call him. And all the LID is doing is creating chaos.
  29. When signing portable always use redundancy when signing in , like i.e. de xx4xxx/4 We already know you are in 4th call area why tell it twice? Proper way would be xx4xxx/m or xx4xxx/p or xx4xxx/mm etc if outside the call area then use xx4xxx/5 which is no longer a rule , but is helpful for stations with beams and propagation like programs.


http://ac4m.us/lid.html

No comments:

Post a Comment